What is the reason and how to solve the problem that the nails are not aligned neatly when the nails are rolled and shaped by the nail coiling equipment?

The reason may be that the nail feeding track is obstructed by debris, or the nails themselves have deviations in size. The solution is to clean the nail feeding track first to ensure that there is no debris or deformation in the track. At the same time, check whether the nail specifications are uniform, for the size of the unqualified nails should be screened out in a timely manner to avoid mixing into the production process.

Nail rolling equipment operation, the phenomenon of stuck nails, how to deal with?

Nail jamming may be due to nail groove wear, resulting in nail jamming. At this time you need to check the wear of the nail groove, if the wear is serious, you need to replace the nail groove in time. In addition, it may also be the hardness of the nail is not uniform, too hard or too soft nails are prone to cause nail jamming, to ensure that the use of nails in line with the hardness standards required by the equipment.

Nail winding equipment speed is not stable, it will affect the production efficiency, how to solve?

Unstable winding speed may be motor failure or transmission system problems. Firstly, check the operation of the motor to see whether there is abnormal noise or heat, if so, you need to contact a professional to repair or replace the motor. At the same time, check whether the transmission belt is loose or worn, if so, adjust the belt tightness or replace the belt.

What is the problem when abnormal noise suddenly appears during the working process of the equipment?

Abnormal noise may be due to some parts of the equipment are loose or worn. Firstly, stop the machine to check whether the connecting screws of each part are loose, if so, tighten them in time. Then check the gears, bearings and other wear parts, if found worn, should be replaced in a timely manner to avoid further increase in noise, affecting the normal operation of the equipment.

What should I do if the nail hitting strength of the nail coiling equipment is not enough, resulting in the nails not being able to completely nail into the object?

Nail force is not enough may be insufficient air pressure or nail mechanism failure. First check the air pressure system to ensure that the air pressure meets the working requirements of the equipment. If the air pressure is normal, then check whether the spring of the nailing mechanism is not elastic enough, if there is a problem, replace the spring. At the same time, check whether the nail hammer head is worn out, if the wear is serious, need to be replaced.

What should I do if the control system of the nail production machine fails?

Control system failure may be manifested in the operation panel is not responsive, invalid parameter settings, and so on. Firstly, check whether the power supply of the equipment is normal, and whether the connection line of the control system is loose. If the power supply and connecting wires are normal, there may be an error in the control programme, try to restart the equipment to see if it can be restored to normal. If the problem still exists, you need to contact the equipment manufacturer’s technicians for maintenance, do not disassemble the control system without permission, so as not to cause more serious damage.

What should I do if there is a problem with the lubrication system of the equipment?

Problems with the lubrication system may lead to increased wear and tear of equipment parts. Firstly, check whether the oil level of the lubricant is too low, and add the lubricant in time. Then check whether the lubrication pipeline is blocked, if blocked, need to clean the pipeline, to ensure that the lubricant can be properly transported to the various parts that need lubrication. At the same time, the regular replacement of lubricating oil to ensure its lubricating properties.

What is the reason for the bending of the nails during the production process of the coil nail equipment?

Nail bending may be due to improper adjustment of the mould, or the nail is interfered by external force during the nail feeding process. Adjust the position and parameters of the mould to ensure that the nails can be subjected to even pressure during the forming process. At the same time, check whether the nail feeding track is smooth and whether there are any foreign objects protruding, so as to avoid the nails being jammed or bent by abnormal external forces during the nail feeding process.

How to calibrate the inaccuracy of the counter of the nail coiling equipment?

Inaccuracy of the counter may be due to sensor failure or wrong counter setting. Firstly, check if the counter’s sensor is working properly, see if it is covered with dust or damaged, if so, clean or replace the sensor. Then check the setting parameters of the counter to make sure they match the actual running speed and nail specifications of the equipment, and calibrate it according to the instruction manual of the equipment.